Trying to make sense of your data plan? Bytes and bits explained

What’s a bit?

The word bit comes from the phrase “binary digit” and literally means a single “0” or “1”. That means each bit can only have one distinct value: either a zero or one. A bit is represented with the letter “b” and is always lowercase. Bits are the fundamental unit of measurement for informatics and, obviously, you’ll need many bits to represent different kinds of information.

The states 1 and 0 are known as logical states and are used by modern computers and PCs. Since each bit can assume two states, the combination of n bits can assume 2^n different states (2 raised to the nth power). For example, 3 bits can represent 2^3 = 8 different logical states, as shown in the following table:

Possible logical states with 3 bits

Logical state	Numerical equivalent
000	0
001	1
010	2
011	3
100	4
101	5
110	6
111	7

Interestingly: the powers of 2 (1,2,4,8,16,32,64) in binary digits are represented by the number 1 followed by a certain number of 0s. To count the number of 0s to be added, just look at the exponent. For example: 2^8 = 256 in binary is written as 100000000

What is a byte?

A byte is nothing more than the merging of 8 sequential bits, where the information is stored or transported by sending multiple bytes at the same time. The more complex the information, the more bytes are needed to represent it. Bytes are indicated with the letter “B”, which is always capitalized.

Thanks to this simple rule, we know that bits and Bytes have this simple relationship:

• Value in bits = Value in Bytes x 8
• Value in Bytes = Value in bits / 8

Multiples of bits and bytes

Since nowadays millions (if not even billions) of bits or bytes are needed to represent information, specific prefixes have been created to reduce the number of unnecessary digits. Think of the unit of measurement for weight, the gram: to define weights thousands of times greater than the gram, there are other terms we use: such as the hectogram, kilogram, quintal or ton. It’s the same when it comes to informatics.

Initially, differentiation was carried out using binary digits as a reference. A different prefix was assigned for each 2^10 value. Since the conversion wasn’t as clear as what we’re used to, as we think on the basis of 10s and not on the basis of 2s, the prefix was changed from 1024 to 1000 for the international system.

This introduced some error at every level of conversion, but it’s still usable in everyday use. You just have to keep an on the difference between the actual measurement used by PCs and those used “commercially” in the international system.

Bit multiples

Name (international system)	Unit of measurement	Multiple	Name (binary prefixes)	Unit of measurement	Multiple
Kilobit	kb	10^3	Kibibit	Kib	2^10
Megabit	Mb	10^6	Mebibit	Mib	2^20
Gigabit	Gb	10^9	Gibibit	Gib	2^30
Terabit	Tb	10^12	Tebibit	Tib	2^40
Petabit	Pb	10^15	Pebibit	Pib	2^50
Exabit	Eb	10^18	Exbibit	Eib	2^60
Zettabit	Zb	10^21	Zebibit	Zib	2^70
Yottabit	Yb	10^24	Yebibit	Yib	2^80

Byte multiples

Name (international system)	Unit of measurement	Multiple	Name (binary prefixes)	Unit of measurement	Multiple
KiloByte	kB	10^3	KibiByte	KiB	2^10
MegaByte	MB	10^6	MebiByte	MiB	2^20
GigaByte	GB	10^9	GibiByte	GiB	2^30
TeraByte	TB	10^12	TebiByte	TiB	2^40
PetaByte	PB	10^15	PebiByte	PiB	2^50
ExaByte	EB	10^18	ExbiByte	EiB	2^60
ZettaByte	ZB	10^21	ZebiByte	ZiB	2^70
YottaByte	YB	10^24	YebiByte	YiB	2^80

Some practical examples

To understand how these units of measurement affect our daily lives on computers, it’s enough to think of memory as enormous buckets that are filled with bits/Bytes that are represented by a volume of water: a 128-liter bucket is 1000 times larger than a 128-millimeter container. The same ratio applies for GB and MB and so on.

If you have 10GB of data traffic available from your mobile carrier, you can physically generate a traffic volume of 10GB. There’s no maximum connection time, as it depends solely on the volume occupied by what you see. Logically, images and videos carry a greater weight than text, which is why too much social media will drain your monthly plan.

• 8GB of RAM does not make smartphones better

When we talk about bits and bytes, we speak of certain volumes, so it’s easy to understand why the same units of measurement are used to indicate speeds - usually bits for internet connections and bytes for reading or writing data.

When we talk about pipes, we use liters per second to indicate the speed with which water can flow through them. It’s the same for data connections (wired or wireless): bits per second indicates the rate at which information can be transferred. Warning: many retailers play on the relationship between bits and bytes and exploit users who don’t understand the difference. If you’ve been promised download speeds of 20 megabits per seconds, that’s “only” 2.5 megabytes per second.

When indicating connection speeds, the measurement units in bits or bytes are followed by the suffix “ps”, which means “per second”. 4G connections can reach transmission rates of up to 1.2 Gbps (gigabits per second) and common SSDs transfer data at speeds of several hundred MBps (MegaBytes per second).